"Loranger, E."

Groupement par Type de document | sans groupement
Aller à Article
Nombre de documents archivés : 21.

Article

Nasri, K., Loranger, E. et Toubal, L. (2023). Effect of cellulose and lignin content on the mechanical properties and drop-weight impact damage of injection-molded polypropylene-flax and -pine fiber composites. Journal of Composite Materials . ISSN 0021-9983 1530-793X DOI 10.1177/00219983231186208

Nasri, K., Loranger, E. et Toubal, L. (2023). Effect of cellulose and lignin content on the mechanical properties and drop-weight impact damage of injection-molded polypropylene-flax and -pine fiber composites. Journal of Composite Materials, 57 (21). pp. 3347-3364. ISSN 0021-9983 1530-793X DOI 10.1177/00219983231186208

Nasri, K., Toubal, L., Loranger, E. et Koffi, D. (2022). Influence of UV irradiation on mechanical properties and drop-weight impact performance of polypropylene biocomposites reinforced with short flax and pine fibers. Composites Part C: Open Access . Article 100296. ISSN 2666-6820 DOI 10.1016/j.jcomc.2022.100296

Peter, A., Chabot, B. et Loranger, E. (2021). Enhanced activation of ultrasonic pre-treated softwood biochar for efficient heavy metal removal from water. Journal of Environmental Management, 290 . ISSN 0301-4797 DOI 10.1016/j.jenvman.2021.112569

Peter, A., Chabot, B. et Loranger, E. (2021). Pre- and post-pyrolysis effects on iron impregnation of ultrasound pre-treated softwood biochar for potential catalysis applications. SN Applied Sciences, 3 (6). ISSN 2523-3971 DOI 10.1007/s42452-021-04636-y

Peter, A., Chabot, B. et Loranger, E. (2021). Pre- and post-pyrolysis effects on iron impregnation of ultrasound pre-treated softwood biochar for potential catalysis applications. SN Applied Sciences, 3 (6). ISSN 2523-3971 DOI 10.1007/s42452-021-04636-y

Eyebe, G. A., Bideau, B., Loranger, E. et Domingue, F. (2021). Printed microwave frequency humidity sensor operating with phase shifting scheme. IEEE Sensors Journal, 21 (3). pp. 2854-2863. ISSN 1530-437X DOI 10.1109/JSEN.2020.3021951

Djafari Petroudy, S. R., Chabot, B., Loranger, E., Naebe, M., Shojaeiarani, J., Gharehkhani, S., Ahvazi, B., Hu, J. et Thomas, S. (2021). Recent advances in cellulose nanofibers preparation through energy-efficient approaches: A review. Energies, 14 (20). p. 6792. ISSN 1996-1073 DOI 10.3390/en14206792

Djafari Petroudy, S. R., Chabot, B., Loranger, E., Naebe, M., Shojaeiarani, J., Gharehkhani, S., Ahvazi, B., Hu, J. et Thomas, S. (2021). Recent advances in cellulose nanofibers preparation through energy-efficient approaches: A review. Energies, 14 (20). p. 6792. ISSN 1996-1073 DOI 10.3390/en14206792

El Idrissi, B., Loranger, E., Lanouette, R., Bousquet, J. P. et Martinez, M. (2020). Kraft, BCTMP, and TMP dewatering behaviour along the axis of a screw press. BioResources, 15 (1). pp. 1282-1297. ISSN 1930-2126

El Idrissi, B., Loranger, E., Lanouette, R., Bousquet, J. P. et Martinez, M. (2020). Modelling of dewatering wood pulp in a screw press using statistical and multivariate analysis. BioResources, 15 (3). pp. 5899-5912. ISSN 1930-2126

Peter, A., Chabot, B. et Loranger, E. (2020). The influence of ultrasonic pre-treatments on metal adsorption properties of softwood-derived biochar. Bioresource Technology Reports, 11 . ISSN 2589-014X DOI 10.1016/j.biteb.2020.100445

Myja, D., Loranger, E. et Lanouette, R. (2019). 4-Acetamido-Tempo-mediated oxidation of wood chips and thermomechanical pulp in large scale. Industrial and Engineering Chemistry Research, 58 (28). pp. 12723-12728. ISSN 0888-5885 DOI 10.1021/acs.iecr.9b02049

Myja, D., Loranger, E. et Lanouette, R. (2019). The effects of 4-acetamido-TEMPO-mediated oxidation on the extraction components of thermomechanical pulp. Cellulose, 26 (9). pp. 5653-5663. ISSN 0969-0239 DOI 10.1007/s10570-019-02453-6

Myja, D., Loranger, E. et Lanouette, R. (2019). Treatment levels of 4-acetamido-TEMPO oxidized thermomechanical pulp to improve paper properties and clay retention. BioResources, 14 (3). pp. 7056-7067. ISSN 1930-2126

Cherpozat, L., Loranger, E. et Daneault, C. (2019). Ultrasonic pretreatment of soft wood biomass prior to conventional pyrolysis: scale-up effects and limitations. Biomass and Bioenergy, 124 . pp. 54-63. ISSN 0961-9534 (ISSN) DOI 10.1016/j.biombioe.2019.03.009

Bideau, B., Loranger, E. et Daneault, C. (2018). Nanocellulose-polypyrrole-coated paperboard for food packaging application. Progress in Organic Coatings, 123 . pp. 128-133. ISSN 0300-9440 DOI 10.1016/j.porgcoat.2018.07.003

Bideau, B., Bras, J., Adoui, N., Loranger, E. et Daneault, C. (2017). Polypyrrole/nanocellulose composite for food preservation: barrier and antioxidant characterization. Food Packaging and Shelf Life, 12 . pp. 1-8. ISSN 2214-2894 DOI 10.1016/j.fpsl.2017.01.007

Cherpozat, L., Loranger, E. et Daneault, C. (2017). Ultrasonic pretreatment effects on the bio-oil yield of a laboratory-scale slow wood pyrolysis. Journal of Analytical and Applied Pyrolysis, 126 . pp. 31-38. ISSN 0165-2370 DOI 10.1016/j.jaap.2017.06.027

Bideau, B., Cherpozat, L., Loranger, E. et Daneault, C. (2016). Conductive nanocomposites based on TEMPO-oxidized cellulose and poly(N-3-aminopropylpyrrole-co-pyrrole). Industrial Crops and Products, 93 . pp. 136-141. ISSN 0926-6690 DOI 10.1016/j.indcrop.2016.06.003

Bideau, B., Bras, J., Saini, S., Daneault, C. et Loranger, E. (2016). Mechanical and antibacterial properties of a nanocellulose-polypyrrole multilayer composite. Materials Science and Engineering C, 69 . pp. 977-984. ISSN 0928-4931 DOI 10.1016/j.msec.2016.08.005

Cette liste a été générée le Fri Dec 6 02:15:49 2024 EST.