"Toubal, L."

Article

Nasri, K., Loranger, E. et Toubal, L. (2023). Effect of cellulose and lignin content on the mechanical properties and drop-weight impact damage of injection-molded polypropylene-flax and -pine fiber composites. Journal of Composite Materials . ISSN 0021-9983 1530-793X DOI 10.1177/00219983231186208

Nasri, K., Loranger, E. et Toubal, L. (2023). Effect of cellulose and lignin content on the mechanical properties and drop-weight impact damage of injection-molded polypropylene-flax and -pine fiber composites. Journal of Composite Materials, 57 (21). pp. 3347-3364. ISSN 0021-9983 1530-793X DOI 10.1177/00219983231186208

Nasri, K., Toubal, L., Loranger, E. et Koffi, D. (2022). Influence of UV irradiation on mechanical properties and drop-weight impact performance of polypropylene biocomposites reinforced with short flax and pine fibers. Composites Part C: Open Access . Article 100296. ISSN 2666-6820 DOI 10.1016/j.jcomc.2022.100296

Desnoes, E., Toubal, L., Thibeault, D., Bouazza, A. H. et Montplaisir, D. (2021). Bio-sourced vinyl ester resin reinforced with microfibrillar cellulose: Mechanical and thermal properties. Polymers and Polymer Composites, 29 (9). S306-S316. ISSN 0967-3911 DOI 10.1177/09673911211002046

Koffi, A., Koffi, D. et Toubal, L. (2021). Mechanical properties and drop-weight impact performance of injection-molded HDPE/birch fiber composites. Polymer Testing, 93 . Article 106956. ISSN 0142-9418 DOI 10.1016/j.polymertesting.2020.106956

Koffi, A., Mijiyawa, F., Koffi, D., Erchiqui, F. et Toubal, L. (2021). Mechanical properties,wettability and thermal degradation of HDPE/birch fiber composite. Polymers, 13 (9). ISSN 2073-4360 DOI 10.3390/polym13091459

Bravo, A., Toubal, L., Koffi, D. et Erchiqui, F. (2018). Gear fatigue life and thermomechanical behavior of novel green and bio-composite materials VS high-performance thermoplastics. Polymer Testing, 66 . pp. 403-414. ISSN 0142-9418 DOI 10.1016/j.polymertesting.2016.12.031

Mejri, M., Toubal, L., Cuillière, J. C. et François, V. (2018). Hygrothermal aging effects on mechanical and fatigue behaviors of a short-natural-fiber-reinforced composite. International Journal of Fatigue, 108 . pp. 96-108. ISSN 0142-1123 DOI 10.1016/j.ijfatigue.2017.11.004

Mejri, M., Toubal, L., Cuillière, J. C. et François, V. (2017). Fatigue life and residual strength of a short-natural-fiber-reinforced plastic vs Nylon. Composites Part B: Engineering, 110 . pp. 429-441. ISSN 1359-8368 DOI 10.1016/j.compositesb.2016.11.036

Sodoke, K. F., Laperrière, L., Toubal, L. et Khakestar, R. S. (2016). Fuzzy logic response to Young's modulus characterization of a flax-epoxy natural fiber composite. Materials and Design, 89 . pp. 273-285. ISSN 0264-1275 DOI 10.1016/j.matdes.2015.09.165

Toubal, L., Cuillière, J.-C., Bensalem, K., François, V. et Gning, P.-B. (2016). Hygrothermal effect on moisture kinetics and mechanical properties of hemp/polypropylene composite: experimental and numerical studies. Polymer Composites, 37 (8). pp. 2342-2352. ISSN 1548-0569 DOI 10.1002/pc.23414

Koffi, D., Koffi, A. et Toubal, L. (2016). Injection molding parameters influence on PE composites parts. International Journal of Engineering Research and Development, 12 (10). pp. 29-39. ISSN 2278-800X 2278-067X

Koffi, D., Bravo, A., Toubal, L. et Erchiqui, F. (2016). Optimized use of cooling holes to decrease the amount of thermal damage on a plastic gear tooth. Advances in Mechanical Engineering, 8 (5). pp. 1-13. ISSN 1687-8132 DOI 10.1177/1687814016638824