"Koffi, D."

Article

Nasri, K., Toubal, L., Loranger, E. et Koffi, D. (2022). Influence of UV irradiation on mechanical properties and drop-weight impact performance of polypropylene biocomposites reinforced with short flax and pine fibers. Composites Part C: Open Access . Article 100296. ISSN 2666-6820 DOI 10.1016/j.jcomc.2022.100296

Koffi, A., Koffi, D. et Toubal, L. (2021). Mechanical properties and drop-weight impact performance of injection-molded HDPE/birch fiber composites. Polymer Testing, 93 . Article 106956. ISSN 0142-9418 DOI 10.1016/j.polymertesting.2020.106956

Koffi, A., Mijiyawa, F., Koffi, D., Erchiqui, F. et Toubal, L. (2021). Mechanical properties,wettability and thermal degradation of HDPE/birch fiber composite. Polymers, 13 (9). ISSN 2073-4360 DOI 10.3390/polym13091459

Bravo, A., Toubal, L., Koffi, D. et Erchiqui, F. (2018). Gear fatigue life and thermomechanical behavior of novel green and bio-composite materials VS high-performance thermoplastics. Polymer Testing, 66 . pp. 403-414. ISSN 0142-9418 DOI 10.1016/j.polymertesting.2016.12.031

Koffi, D., Koffi, A. et Toubal, L. (2016). Injection molding parameters influence on PE composites parts. International Journal of Engineering Research and Development, 12 (10). pp. 29-39. ISSN 2278-800X 2278-067X

Koffi, D., Bravo, A., Toubal, L. et Erchiqui, F. (2016). Optimized use of cooling holes to decrease the amount of thermal damage on a plastic gear tooth. Advances in Mechanical Engineering, 8 (5). pp. 1-13. ISSN 1687-8132 DOI 10.1177/1687814016638824